-
Knowledge of using stainless steel flanges
The weighing process of stainless steel flanges is detailed as follows: the large feed during the storage stage is shown in the figure. When using the weighing hopper to discharge materials, the conveyor belt inputs stored materials from the silo to the feeding hopper. If the time relay is adjusted to about left or right, the stored material will be approximately extra weighed. The large and small doors will open simultaneously, and the material will quickly fall into the weighing hopper.
넶2 2026-07-14 -
What is the process of making carbon steel elbows
Firstly, weld polygonal ring shells with polygonal cross-sections or polygonal sector shells with closed ends. After filling the interior with pressure medium, apply internal pressure. Under the action of internal pressure, the cross-section changes from a polygon to a circle, forming an a-shaped annular shell; Then, according to the customer's needs, the annular shell can be cut into 4 90 elbows, 6 60 elbows, or other specifications of elbows.
넶5 2026-07-14 -
What is the process of making carbon steel elbows
Firstly, weld polygonal ring shells with polygonal cross-sections or polygonal sector shells with closed ends. After filling the interior with pressure medium, apply internal pressure. Under the action of internal pressure, the cross-section changes from a polygon to a circle, forming an a-shaped annular shell; Then, according to the customer's needs, the annular shell can be cut into 4 90 elbows, 6 60 elbows, or other specifications of elbows.
넶2 2026-07-14
